Product Description
Short Description:
KSDY Mobile screw air compressor is widely used in mining, water conservancy, transportation, shipbuilding, urban construction, energy, military and other industries. In Europe and the United States and other developed countries, power with mobile air compressor, the
Product Description
Product introduction:
KS series new screw air compressor humanized man-machine interface display control system
1. The operation is particularly convenient and simple
2. The operating status is clear at a glance
3. There is a spare output interface, which can realize multi-unit interlocking control and remote diagnosis control
KS series new screw air compressor with built-in oil separation system
The built-in oil separator design ensures the oil-gas separation effect and reduces the fuel consumption. The product quality is fully guaranteed from the initial design
KS Series New Type Screw Air Compressor High-efficiency Air Intake Control Valve
1. ON/OFF control method
2. With check valve anti-injection design
KS series new type screw air compressor, a new generation of low-consumption and high-efficiency motors
1. Large starting torque
2. Insulation class F, protection class IP54
3. CHINAMFG bearings, low noise, long life
Product Advantages:
1. SKY patented line, high energy saving
The special rotor tooth profile provides excellent performance for each type of handpiece; innovative design, optimized structure, and high reliability performance.
2. Reasonable design to reduce operating costs
The overall structure is compact, the volume is light, and the on-site movement is flexible, which saves time on site movement.
3. Open design, easy to maintain
The spacious opening doors and windows make it very convenient to maintain the air filter, oil filter, oil separator core, etc. The parts to be repaired are within reach, reducing downtime maintenance and repair time.
Advantage of KSCY Series Portable Screw Air Compressor
1. Convenient and easy to use, can work 24 hours unattended all day, no load automatic start, full load automatic stop.
2. Widely used in precision coating, electronic parts processing, micro processing and other industries of compressed air processing equipment.
3. Intelligent design. Perfect interface control system, cooling system, inlet filtration system.
4. Strong stability. For a long time in the working environment, the exhaust volume and air pressure are stable, no crash phenomenon, and the failure rate is low.
Product Parameters
| Model | Exhaust pressure (Mpa) |
Exhaust volume m3/min |
Motor power (KW) |
Exhaust interface | Weight (kg) |
Outline dimensions (mm) |
| KSDY-13.6/8(Four Wheels) | 0.8 | 13.6 | 75 | G3/4*1 G11/2*1 |
1750 | 2700*1700*1700 |
| KSDY- 12.5/10(Four Wheels) | 1 | 12.5 | 1750 | 2700*1700*1700 | ||
| KSDY-10/14.5(Two Wheels) | 1.45 | 10 | 1600 | 2820*1525*1700 | ||
| KSDY-16.5/8 (Four Wheels) | 0.8 | 16.5 | 90 | G3/4*1 G2*1 |
1940 | 2730*1680*1800 |
| KSDY-13/14.5(Two Wheels) | 1.45 | 13 | 1760 | 3571*1670*1850 | ||
| KSDY-13/14.5 (Four Wheels) | 1.45 | 13 | 1910 | 2730*1680*1800 | ||
| KSDY-20/8 (Four Wheels) | 0.8 | 20 | 110 | 3115 | 3065*1835*2000 | |
| KSDY-24/8 (Four Wheels) | 0.8 | 24 | 132 | 3150 | 3065*1835*2000 | |
| KSDY-18/13 (Four Wheels) | 1.3 | 18 | 132-2 | 3070 | 3065*1835*2000 | |
| KSDY-15/17 (Four Wheels) | 1.7 | 15 | 2975 | 3065*1835*2000 | ||
| KSDY-20/18-II | 1.8 | 20 | 132-4 | 3800 | 3445*1600*2030 | |
| KSDY-17/17 (Four Wheels) | 1.7 | 17 | 3500 | 3445*1600*2030 | ||
| KSDY-20/17 (Four Wheels) | 1.7 | 20 | 160-2 | 4100 | 3545*1820*2320 | |
| KSDY24/14(Four Wheels) | 1.4 | 24 | 185-2 | 3900 | 3545*1820*2320 |
Detailed Photos
Company Profile
If you need to buy a water well drill bit and drill pipe, mud pump, or air compressor, we also have drill bit and drill pipe, mud pump, and air compressor, you can buy everything from us, and we can be your one-stop shop, which means that all your needs are at the touch of a button.
For details of mud pumps, air compressor bits, etc., please consult our sales staff.
Feel free to contact us for more details and custom program plans.
FAQ
1.How do your prices compare to the manufacturer/factory?
We are the main distributor of major construction machinery manufacturers/factories in China and keep getting the best dealer prices. From the comparison and feedback from many customers, our price is even more competitive than the factory/factory price.
2.How is the delivery time?
In general, we can deliver ordinary machines immediately to our customers within 7 days, as we have various resources to inspect stock machines, locally and nationwide, and receive machines in a timely manner. But it takes more than 30 days for a manufacturer/factory to produce an order machine.
3.How often can you respond to customer inquiries?
Our team is made up of a group of hardworking and dynamic people who work around the clock to respond to customer inquiries and questions. Most issues can be successfully resolved within 8 hours, while manufacturers/factories take longer to respond.
4.Which payment methods can you accept?
Usually we can use wire transfer or letter of credit, and sometimes DP. (1) Wire transfer, 30% deposit in advance, 70% balance paid before shipment, long-term cooperation customers can present a copy of the original bill of lading. (2) Letter of credit, 100% irrevocable letter of credit without “soft terms” from internationally recognized banks can be accepted. Please seek advice from the sales manager you work with.
5.Which clauses in the Incoterms 2571 can you use?
We are a professional and mature international player and can handle all INCOTERMS 2571, we usually work on regular terms like FOB, CFR, CIF, CIP, DAP.
6.How long are your prices valid?
We are a gentle and friendly supplier, never greedy for profit. Our prices remain largely stable throughout the year. We will only adjust the price according to the following 2 situations: (1) USD exchange rate: According to the international currency exchange rate, the RMB exchange rate is quite different; (2) The manufacturer/factory adjusted the machine price due to the increase of labor cost or raw material cost.
7.What logistics methods can you use for shipping?
We can transport construction machinery with various means of transport. (1) 80% of our shipping will be by the sea, to all major continents such as Africa, South America, Middle East. (2) China’s inland neighboring countries, such as Russia, Mongolia, Kazakhstan, Kyrgyzstan, Tajikistan, Uzbekistan, Turkmenistan, etc., can transport by road or rail. (3) For urgently needed light spare parts, we can provide international express services
| After-sales Service: | 24*7 Serve |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Samples: |
US$ 13000/Roll
1 Roll(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
What is the impact of humidity on compressed air quality?
Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:
1. Corrosion:
High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.
2. Contaminant Carryover:
Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.
3. Decreased Efficiency of Pneumatic Systems:
Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.
4. Product Contamination:
In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.
5. Increased Maintenance Requirements:
Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.
6. Adverse Effects on Instrumentation:
Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.
To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.
.webp)
What safety precautions should be taken when working with compressed air?
Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:
1. Personal Protective Equipment (PPE):
Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.
2. Compressed Air Storage:
Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.
3. Pressure Regulation:
Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.
4. Air Hose Inspection:
Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.
5. Air Blowguns:
Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.
6. Air Tool Safety:
Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.
7. Air Compressor Maintenance:
Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.
8. Training and Education:
Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.
9. Lockout/Tagout:
When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.
10. Proper Ventilation:
Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.
By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.
.webp)
How is air pressure measured in air compressors?
Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:
1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.
2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.
To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.
It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.
When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.
Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.
editor by CX 2023-10-24